Engine Oil; Hoisting The Outboard Motor; Storage Precautions - Honda Outdoor Motor BF75D Owner's Manual

Engine Oil

1. Change the engine oil and the oil
−
filter (p. 86 88 ).
2. Remove the spark plugs (p.
and remove the emergency stop
switch clip from the emergency
stop switch.
3. Pour a teaspoon (p. 123
3
cm ) of clean engine oil into each
cylinder.
4. Rotate the engine a few
revolutions to distribute the oil in
the cylinders.
5. Reinstall the spark plugs (p.
HOISTING THE OUTBOARD
MOTOR
89 ),
ENGINE
HANGERS
−
) (5 10
1. Unlock and remove the engine
91 ). cover (p.
2. Attach the hoist hooks to the
engine hangers.
3. Disconnect the outboard motor
from the boat, hoist the outboard
motor, and move it to the storage
area.
HOIST
HOOKS
84 ).
STORAGE
4. After the outboard motor is placed
in storage and disconnected from
the hoist, install the engine cover.

STORAGE PRECAUTIONS

Select a well-ventilated storage area.
If possible, avoid storage areas with
high humidity.
If storing a container of gasoline,
store it away from any appliance that
operates with a flame, such as a
furnace, water heater, or clothes
dryer. Also avoid any area with a
spark producing electric motor, or
where power tools are operated.
109