CONTROLS AND FEATURES
CONTROL AND FEATURE IDENTIFICATION CODES
Model
Type
Transom Height
(Shaft Length)
Tiller Handle
Remote Control
Power Trim/Tilt
Trim Meter (optional equipment)
Tachometer (optional equipment)
Refer to this chart for an explanation of the Type Codes used in this manual to identify control and feature applications.
TYPE CODE (example)
L
R
T
Tilt System
T = Power Trim/Tilt
Control System
H = Tiller Handle
R = Remote Control
Transom Height (Shaft Length)
L = 21.1 in (537 mm)
X = 26.1 in (664 mm)
10
LHT
21.1 in (537 mm)
26.1 in (664 mm)
BF75D
LRT
LHT
BF90D
LRT
XRT