Removal From Storage - Honda Outdoor Motor BF75D Owner's Manual

STORAGE
OUTBOARD MOTOR STAND
If the outboard motor will be
removed from the boat for storage,
we recommend storing it vertically
by mounting it on a commercially
available stand.
110
PROTECTOR
(Port side turned down as shown.)
If it is necessary to store the outboard
motor horizontally as shown, drain
the vapor separator (p. 107
drain the engine oil (p. 86
removing the outboard motor from
the boat.
Rest the motor on a cushion of
protective material.
Cover the outboard motor to keep out
dust. Do not use plastic sheet as a
dust cover. A nonporous cover will
trap moisture, promoting rust and
corrosion.

REMOVAL FROM STORAGE

Check your outboard motor as
described in the
OPERATION
If the cylinders were coated with oil
during storage preparation, the
engine may smoke briefly at startup.
This is normal.
), and
), before
BEFORE
chapter of this manual.