Clutch Cable Adjustment; Throttle Cable - Honda F220 Owner's Manual

SERVICING YOUR HONDA TILLER
CLUTCH CABLE ADJUSTMENT
1.
Set the handlebar height in the center position (see page 19).
2. The clutch spring should extend 0.08
k
0.02 in (2.0
k
0.5 mm) when the
main clutch lever is moved from the DISENGAGED position to the EN-
GAGED position.
.
3. If the spring extension length is incorrect, loosen the lock nut and turn the
adjusting nut in or out just enough to extend the spring. Do not overtighten.
LOCK NUT
THROTTLE CABLE ADJUSTMENT
CLUTCH SPRING END
0.08 f 0.02 in
(2.0 2 0.5
mm)
Measure the free play at the lever tip.
Free play:0.39 - 0.59 in (1 0.0 - 15.0 mm)
I f the free play is incorrect, turn the adjusting nut in or out as required.
P
0.39
-
0.59 in
(10.0
-
15.0 mm)
' '
f l
LOCK NUT
\
35