IBM IntelliStation A Pro 6224 User Manual page 56

10. If you have another adapter to install, repeat steps 4 through 9..
11. If you have installed a full-length adapter, rotate the front adapter-support
12. Reinstall the rear adapter-retention bracket; then, rotate the bracket to the
13. If you have other options to install, do so now; otherwise, continue with step
14. Replace the support bracket (see "Removing and installing the support
15. Replace the side cover (see "Replacing the side cover" on page 63).
16. Reconnect the external cables and power cords; then, turn on the attached
42
IntelliStation A Pro Type 6224: User's Guide
Rear
adapter-
retention
bracket
Expansion-
slot cover
9. Connect required cables to the adapter. Route cables so that they do not block
the flow of air from the fans. If you are installing an optional SCSI adapter, see
"Cabling an optional SCSI adapter" on page 43 for additional information.
bracket to the closed (locked) position.
Note: If any adapter in your computer is large or has heavy cables attached to
it, you can secure the adapter with a screw: insert one backup expansion-slot
screw (stored on the frame-support bracket) through the top of each adapter
bracket into the screw hole and secure the adapter before proceeding to the
next step. If you use a screw to secure an adapter, you will have to secure all
adapters with screws. You cannot use both the screws and the retention
brackets to secure adapters. You must use one method or the other.
closed (locked) position.
Note: The rear retention bracket rests against the computer side cover. You
might find it easier to lay the computer on its side to replace the side cover.
14.
bracket" on page 38).
devices and the computer.
Adapter
Front
adapter-
retention
bracket
13 94