Installing An Adapter - IBM IntelliStation A Pro 6224 User Manual

4. Pull the top of the bezel away from the chassis; then, push the bezel down to
5. Remove the bezel from the server and store the bezel in a safe place.
For instructions for replacing the bezel, see "Replacing the bezel" on page 63.

Installing an adapter

The following notes describe the types of adapters that your computer supports and
other information that you must consider when installing an adapter. See
"System-board option connectors" on page 35 for an illustration of the adapter slot
locations.
v Read the documentation that comes with your operating system.
v Locate the documentation that comes with the adapter and follow those
v Your computer comes with adapter connectors or slots. The Accelerated
v Your computer supports PCI-X adapters, 3.3 V PCI adapters, and universal PCI
v None of the PCI-X slots are hot-plug slots.
v You can install 64-bit or 32-bit adapters in PCI-X slots 1, 2, 3, 4, and 5.
40
IntelliStation A Pro Type 6224: User's Guide
disengage the bottom tabs.
instructions in addition to the instructions in this chapter. If you need to change
the switch or jumper settings on your adapter, follow the instructions that come
with the adapter.
Graphics Port (AGP) video adapter is installed in the AGP slot. You can install up
to five additional adapters in your computer in PCI-X slots 1, 2, 3, 4, and 5.
adapters.