Connect To The Internet - Sierra Wireless AirCard 762S User Manual

Rev 2 May.12
Note: Depending on your service provider, the battery may come partially-charged and
ready to go. When the battery needs recharging, follow the instructions in
Battery on page 37.

Connect to the Internet

Note: Your mobile hotspot does not need to be connected to the computer with the USB
cable to connect to the Internet. The USB cable is used mainly for recharging the battery.
(If you want to connect to the Internet with the mobile hotspot tethered to the laptop with
the USB cable, see Tethered mode
To connect to the Internet:
1. Press and hold the Power key for a few seconds to turn on the mobile
hotspot.
The first time you turn on the mobile hotspot, you'll be asked to select a lan-
guage on the LCD. After that, you can change the language on the home-
page. (See Select a Language
The mobile hotspot automatically searches for and connects to your service
provider's mobile broadband network. You can also connect to your service
provider's network from the dashboard. See
Note: The LCD screen may go into sleep mode to save power. To wake up the LCD
screen, press any button or key.
2. Connect your computer or other device to your Wi-Fi network.
a. On your computer, view the list of available Wi-Fi networks.
b. Select the SSID displayed on the mobile hotspot LCD screen, and
connect to it.
c. When prompted, enter your Wi-Fi Passphrase, as it appears on the
mobile hotspot LCD screen.
3. Launch your browser and go to the homepage http://dna.mokkula.
If SIM security is enabled:
a. SIM security is enabled by default for DNA SIM cards (and may be
enabled for other SIM cards). If SIM security is enabled, enter the Admin
Password (default password is 12345) in the pop-up window.
on page 18 before connecting for the first time.)
on page 23.)
Dashboard mode
Get Started
Recharge the
on page 13.
17