Update The Firmware From The Lcd Screen - Sierra Wireless AirCard 762S User Manual

Rev 2 May.12

Update the firmware from the LCD screen

When new firmware is available for downloading, you will receive a message on
the LCD screen. (The message remains on the screen for 1 minute.)
Firmware Update Available
Firmware Update Available
Press to download
Press to download
1. While the message is on the LCD screen, press the Power key to download
the firmware. You can continue to use the mobile hotspot while the firmware
is being downloaded.
If the battery is low, you will be instructed to use the AC adapter to plug the
mobile hotspot into a wall socket before continuing.
2. When the firmware download is complete, you'll be given the option to install
the firmware.
If you do not update the firmware, either from the LCD or the homepage, this
message repeats three times, 8 hours apart, and then after a further 8 hours
the firmware automatically updates the next time you turn the mobile hotspot
on.
Firmware Update Available
(device may be unusable for
about 5 minutes)
Press to install
Note: You cannot use the mobile hotspot during the firmware installation, which may take
up to 5 minutes.
3. Press the Power key to install the firmware.
4. When the firmware update is complete, reconnect your laptop or other Wi-Fi
devices to your mobile hotspot Wi-Fi network.
Update the firmware from the homepage
When new firmware is available for downloading, you will receive an alert on the
LCD screen.
1. On the Mobile Hotspot Homepage, log in as Administrator.
2. Click the Messages icon (
Use Your Mobile Hotspot
).
39