Connecting Front Speakers That Support Bi-Amp Connections - Yamaha RX-A720 Owner's Manual

1 2 3 4 5 6 7 8 9 10
Speaker connections
Connecting front speakers that
support bi-amp connections
When using front speakers that support bi-amp
connections, connect them to the FRONT jacks and
SURROUND BACK/BI-AMP jacks.
To enable the bi-amp function, set "Power Amp Assign"
(p.82) in the "Setup" menu to "5ch BI-AMP" after
connecting the power cable to an AC wall outlet.
The unit (rear)
SPEAKERS
SURROUND BACK/BI-AMP
FRONT CENTER SURROUND
SINGLE
1
2
AUDIO ZONE 2
SUBWOOFER
OUT OUT
1 2
3
9
4
Caution
• Before making bi-amp connections, remove any brackets or
cables that connect a woofer with a tweeter. Refer to the
instruction manual of the speakers for details. If you are not
making bi-amp connections, make sure that the brackets or
cables are connected before connecting the speaker cables.
• Surround back speakers cannot be used during bi-amp
connections.
ZONE 2/PRESENCE
EXTRA SP
AC IN
5
PREPARATIONS ➤ Connecting speakers
19
En