Connecting Front Speakers That Support Bi-Amp Connections - Yamaha RX-V485 Owner's Manual

Connecting front speakers that support bi-amp
connections
You can connect the front speakers that support bi-amp connections.
To enable the bi-amp function, configure the necessary speaker settings. For details,
see the following:
• "Assigning speaker configuration" (p.32)
• "Setting your speaker system" (p.92)
Notice
▪ Before making bi-amp connections, remove any brackets or cables that connect a woofer with a
tweeter. Refer to the instruction manual of the speakers for details. If you are not making bi-amp
connections, make sure that the brackets or cables are connected before connecting the speaker
cables.
The unit (rear)
1
Note
▪ The following speakers cannot be connected simultaneously.
– Surround speakers
– Zone B speakers
– Bi-amp speakers
▪ The FRONT terminals and SURROUND/BI-AMP/ZONE B terminals output the same signals.
23
En
2