Chapter 3 - Input/Output Settings; Power Up Beeper; Beep On Bel Character; Trigger Click - Honeywell Vuquest 3310g User Manual

3
Input/Output Settings

Power Up Beeper

The scanner can be programmed to beep when it's powered up. Scan the Off
bar code(s) if you don't want a power up beep. Default = Power Up Beeper On
- Scanner.
Power Up Beeper Off -
Scanner

Beep on BEL Character

You may wish to force the scanner to beep upon a command sent from the host.
If you scan the Beep on BEL On bar code below, the scanner will beep every
time a BEL character is received from the host. Default = Beep on BEL Off.
*Beep on BEL Off

Trigger Click

To hear an audible click every time the scanner trigger is pressed, scan the
Trigger Click On bar code below. Scan the Trigger Click Off code if you don't
wish to hear the click. (This feature has no effect on serial or automatic trigger-
ing.) Default = Trigger Click Off.
*Trigger Click Off
* Power Up Beeper On -
Scanner
Beep on BEL On
Trigger Click On
3 - 1