Code 93 Code Page - Honeywell Vuquest 3310g User Manual

which the bar codes are read, deleting the first space from each. The
scanner transmits the appended data when it reads a Code 93 bar code
that starts with a character other than a space. Default = Off.
On
* Off

Code 93 Code Page

Code pages define the mapping of character codes to characters. If the
data received does not display with the proper characters, it may be
because the bar code being scanned was created using a code page that
is different from the one the host program is expecting. If this is the case,
scan the bar code below, select the code page with which the bar codes
were created (see Code Page Mapping of Printed Bar Codes on page 15-
6), and scan the value and the Save bar code from the Programming Chart
on the inside the back cover of this manual. The data characters should
then appear properly.
Code 93 Code Page
7 - 15