External Illumination Parameters - Honeywell Vuquest 3310g User Manual

External Illumination Parameters

Absolute Maximum
Maximum voltage on out-
put pin with scanner pow-
ered down.
Maximum current driven
into pin from external
source.
Parameter Values
Output Low Voltage
Iout = 500uA
Output Low Voltage
Iout = 1mA
Output Low Voltage
Iout = 4mA
Output Low Voltage
Iout = 6mA
Output High Voltage
Iout = -500uA
Output High Voltage
Iout = -1mA
Output High Voltage
Iout = -4mA
Output High Voltage
Iout = -6mA
High Value: 6 Volts
High Value: 5mA
High Value: 0.6 Volts
High Value: 0.7 Volts
High Value: 1.0 Volts
High Value: 1.2 Volts
Low Value: 3.6 Volts
Low Value: 3.5 Volts
Low Value: 3.3 Volts
Low Value: 3.1 Volts
This allows a pull-up to be
connected to this line provided
it does not exceed the current
on the next line of this table
while operating.
Maximum current limited by
series resistor dissipation.
Internal one-hundred ohm
series resistor drop included.
6 - 5