Times - Fujitsu M4099D Operator's Manual

Language
This function sets the message language of the LCD to English or Japanese.
LCD display
Language
The following is an example of operation when you change the setting.
1. In <<SETUP MODE>> initial screen, press
.
ENTER
The <<SETUP MODE>> menu screen
(Settings or Paper Length Check) appears.
NOTE
The "Settings" screen does not appear and
the "Paper Length Check" screen first ap-
pears when your scanner is not controlled
through the video or TP interface.
2. Press repeatedly until "Language"
appears in the lower line of the menu screen.
3. Press .
ENTER
The option select screen appears with the
current setting English blinking (blinking
indicates "changeable").
4. Press or
The displayed option changes (
blinks).
5. When the desired option appears, press
to save the change.
ENTER
The LCD returns to the <<SETUP MODE>>
menu screen (Language).
6. Press two times.
CANCEL
The LCD returns to the
Options
English, (Default: English)
.
screen.
Remarks
<<SETUP MODE>>
<<SETUP MODE>>
Settings
<<SETUP MODE>>
Paper Length Check
<<SETUP MODE>>
Language
Language
English
Language
<<SETUP MODE>>
Language
6-51