Skew Check - Fujitsu M4099D Operator's Manual

Skew check

This function determines if abnormal skew is detected or not. You cannot change the setting if it is
set by the host computer.
LCD display
Skew Check
The following is an example of operation when you use this function.
1. In <<SETUP MODE>> initial screen, press
The <<SETUP MODE>> menu screen
(Settings or Paper Length Check) appears.
NOTE
The "Settings" screen does not appear and
the "Paper Length Check" screen first ap-
pears when your scanner is not controlled
through the video or TP interface.
2. Press three times.
The <<SETUP MODE>> menu screen (Skew
Check) appears.
3. Press .
ENTER
The option select screen appears with the
current option OFF blinking (blinking indicates
"changeable").
4. Press or
The displayed option changes (ON blinks).
5. Press to save the change.
ENTER
The LCD returns to the <<SETUP MODE>>
menu screen (Skew Check).
6. Press two times.
CANCEL
The LCD returns to the Ready screen.
Options
On, Off (Default: Off)
ENTER
.
Remarks
.
<<SETUP MODE>>
<<SETUP MODE>>
<<SETUP MODE>>
Paper Length Check
<<SETUP MODE>>
<<SETUP MODE>>
Settings
Skew Check
Skew Check
Check: OFF
Skew Check
Check: ON
Skew Check
Ready
6-13