Fujitsu M4099D Operator's Manual page 80

1. In <<SETUP MODE>> initial screen, press
.
ENTER
The <<SETUP MODE>> menu screen
(Settings or Paper Length Check) appears.
NOTE
The "Settings" screen does not appear and
the "Paper Length Check" screen first ap-
pears when your scanner is not controlled
through the video or TP interface.
2. Press repeatedly until "RS232C Baud
Rate" appears in the lower line of the menu
screen.
3. Press .
ENTER
The option select screen appears with the
current setting 4800 blinking (blinking indi-
cates "changeable").
4. Press or
The displayed option changes (9600, 19200,
2400).
5. When the desired option appears, press
to save the change.
ENTER
The LCD returns to the <<SETUP MODE>>
menu screen (RS232C Baud Rate).
6. To quit the <<SETUP MODE>>, turn off the
power.
.
<<SETUP MODE>>
<<SETUP MODE>>
Settings
<<SETUP MODE>>
Paper Length Check
<<SETUP MODE>>
RS232C Baud Rate
RS232C Baud Rate
4800
RS232C Baud Rate
19200
<<SETUP MODE>>
RS232C Baud Rate
6-35