Fujitsu M4099D Operator's Manual page 76

Set "picking speed" according to the table below.
Picking speed
Fast
(factory default)
Slow
The following is an example of operation when you use this function.
1. In <<SETUP MODE>> initial screen, press
.
ENTER
The <<SETUP MODE>> menu screen
(Settings or Paper Length Check) appears.
NOTE
The "Settings" screen does not appear and
the "Paper Length Check" screen first
appears when your scanner is not controlled
through the video or TP interface.
2. Press repeatedly until "Picking Speed"
appears in the lower line of the menu screen.
3. Press .
ENTER
The option select screen appears with the
current setting Fast blinking (blinking indi-
cates "changeable").
4. Press or
The displayed option changes (Slow blinks).
5. Press to save the change.
ENTER
The LCD returns to the <<SETUP MODE>>
menu screen (Picking Speed).
6. Press two times.
CANCEL
The LCD returns to the Ready screen.
"Mis-pick" frequently occurs.
Make the picking
speed slow.
.
<<SETUP MODE>>
<<SETUP MODE>>
Settings
<<SETUP MODE>>
Paper Length Check
<<SETUP MODE>>
Picking Speed
Picking Speed
Fast
Picking Speed
Slow
<<SETUP MODE>>
Picking Speed
Ready
6-31