When The Desired Value Appears, Press; Enter To Save The Change; The Lcd Returns To The <<Setup Mode; Menu Screen (Paper Feed Retry) - Fujitsu M4099D Operator's Manual

4. Press .
The current difference 10 mm blinks (blinking
indicates "changeable").
5. Press or
The displayed option changes (15 mm or 20 mm).
6.

When the desired value appears, press

to save the change.
ENTER
The LCD returns to the <<SETUP MODE>>
menu screen (Paper Length Check).
7. Press
CANCEL

The LCD returns to the Ready screen.

Paper thickness check

This function determines whether or not to enable the paper thickness which is set by the "paper
thickness setup" function to detect a double feed error. You cannot change settings if they are set by
the host computer.
LCD display
Paper Thickness Check
The following is an example of operation when you use this function.
1. In <<SETUP MODE>> initial screen, press
.
ENTER
The <<SETUP MODE>> menu screen
(Settings or Paper Length Check) appears.
NOTE
The "Settings" screen does not appear and
the "Paper Length Check" screen first ap-
pears when your scanner is not controlled
through the video or TP interface.
6-10
.
two times.
Options
On, Off (Default: Off)
Paper Length Check
ON 10 mm
Paper Length Check
ON 20 mm
<<SETUP MODE>>
Paper Length Check
Ready
Remarks
<<SETUP MODE>>
<<SETUP MODE>>
Settings
<<SETUP MODE>>
Paper Length Check