Fujitsu M4099D Operator's Manual page 102

Offline feed test
This function scans sheets of paper continuously for checking entire operation of the mechanism
without a host computer. You can use the Settings function in setup mode to modify scanning
parameters (scanning mode, paper size/orientation, density, resolution, and halftone processing) for
scanning documents.
LCD display
Offline Feed Test
* For SETUP operation, see the "Settings" function previously described in this chapter.
The following is an example of operation when you start the offline feed test after setting scanning
parameters.
1. Put sheets of paper on the hopper table.
2. In the <<TEST MODE>> initial screen, press
.
ENTER
The <<TEST MODE>> menu screen (Offline
Feed Test) appears.
3. Press again.
ENTER
The scanning parameters screen indicates the
current parameters with START blinking (blinking
indicates "selectable").
4. Press .
SETUP blinks (blinking indicates "selectable").
5. Press .
ENTER
The LCD changes to the parameter set screen
with S (simplex mode) blinking (blinking indicates
"selectable").
6. Press .
A4P (A4 size in portrait orientation) blinks
(blinking indicates "selectable").
Test items
START and SETUP
Remarks
START: begins the test.
SETUP: changes settings of scanning
parameters.
<<TEST MODE>>
<<TEST MODE>>
Offline Feed Test
S A4P AT2
START SETUP
S A4P AT2
START SETUP
S A4P AT2
AT2
S A4P AT2
AT2
200 LA
200 LA
200 LA
LA
200 LA
LA
6-57