Product Id - Fujitsu M4099D Operator's Manual

5. When the desired value appears, press
to save the change.
ENTER
The LCD returns to the <<SETUP MODE>>
menu screen (SCSI ID).
6. To quit the <<SETUP MODE>>, turn off the
power.

Product ID

This function sets the product ID of the scanner. Usually, you need not change this setting.
NOTE
You cannot use this function when the setup mode is brought by pressing
status.
LCD display
Product ID
* The model number of this scanner is M4099D.
The following is an example of operation when you use this function.
1. In <<SETUP MODE>> initial screen, press
.
ENTER
The <<SETUP MODE>> menu screen
(Settings or Paper Length Check) appears.
NOTE
The "Settings" screen does not appear and
the "Paper Length Check" screen first ap-
pears when your scanner is not controlled
through the video or TP interface.
Options
M4099D, M3099G (Default: M4099D)
<<SETUP MODE>>
SCSI ID
MENU
Remarks
Model number of this scanner
<<SETUP MODE>>
<<SETUP MODE>>
Settings
<<SETUP MODE>>
Paper Length Check
in the Ready
6-37