Array Rebuild - Promise Technology FastTRAK66 User Manual

FastCheck TM Monitoring Utility
NOTE: During Array Synchronization, users may continue to access the
working array and perform normal PC functions. However, system performance
will be slightly degraded and the process will take longer.
To halt the Synchronization process, right-click the Array # again. The pull-down
menu will appear showing the Stop Synchronize option as shown below.
Once "Stop Synchronize" is selected, you will be asked to verify "Cancel Synchro-
nization?" Click Yes to Stop or No to continue Synchronization.

Array Rebuild

This user command will effectively copy or overwrite data from an existing data
drive in the array on to a blank drive. The operation will be typically used when a
failed drive has been replaced with a new drive within a mirrored array.
NOTE: During Array Rebuild, users may continue to access the working array
and perform normal PC functions. However, system performance will be slightly
degraded and the rebuild process will take longer. Remember during Array
Rebuild, the array does NOT provide data redundancy. It is recommend that all
rebuilds be carried out to completion.
To perform a Rebuild, choose the Array Tab View, right click the array, and choose
Rebuild from the context menu. Once Rebuild is selected, you will be asked to
"Initialize Rebuild process on Array #" by clicking OK.This will open the Rebuild
Wizard Step 1 screen shown below:
5-7