Drive Attachment Order By Connector; Installation Scenarios - Promise Technology FastTRAK66 User Manual

Drives Attachment Order By Connector
The following table shows the order in which drives should be connected to the
FastTrak66 card.

Installation Scenarios

Examine the following installation scenarios which may apply to your system.
Then proceed to Chapter 4 which covers operation of the card's BIOS utility and
array creation.
FastTrak66 coexisting with onboard ATAPI CD-ROM
Do NOT attach ATAPI devices to FastTrak66. FastTrak66 is for hard drives only.
ATAPI IDE CD-ROM drives or other
devices can be installed on
Mainboard or add-on IDE controllers.
No configuration is necessary on the
mainboard BIOS setup.
Hardware Installation
Total Drives IDE 1
One
Two
Three
M & S
Four
M & S
M - Master, S - Slave
IDE 2
M —
M M
M
M & S
3-2