Peco WavePRO K2500-001 Operating Manual page 5

•
READ INSTRUCTIONS CAREFULLY BEFORE ATTEMPTING TO OPERATE THIS THERMOSTAT AND
RECEIVER.
• FOLLOW THE WAVEPRO WIRELESS INSTALLATION INSTRUCTIONS BEFORE PROCEEDING.
• Contact a qualifi ed service person if at any time your system does not operate properly.
• Use care to avoid static discharge to the thermostat and receiver.
• Failure to observe safety information and comply with instructions could result in PERSONAL INJURY,
DEATH AND/OR PROPERTY DAMAGE.
• To avoid electrical shock or damage to equipment, disconnect power before installing or servicing and use
only wiring with insulation rated for full thermostat operating voltage.
• To avoid potential fi re and/or explosion do not use in potentially fl ammable or explosive atmospheres.
• This product, when installed, will be part of an engineered system whose specifi cations and performance
characteristics are not designed or controlled by PECO. You must review your application and national
and local codes to assure that your installation will be functional and safe.
• Retain these instructions for future reference.
IMPORTANT NOTE: This thermostat was shipped with factory default settings. Your thermostat's installer
may have confi gured the thermostat differently from the factory-default settings, and may have modifi ed
or disabled certain features. Contact the installer or a service technician if you have questions about the
thermostat's confi guration.
!
CAUTION!
5