Peco WavePRO K2500-001 Operating Manual page 19

CUSTOM PROGRAM (CONT.)
MTUWTHF
After the Day/Group of Days are selected,
each time period must be programmed for
the start time as well as the Heat and Cool
Setpoints.
Note : Repeat steps 6 through 10 for
i
remaining day(s) and time periods.
SET
SLEEP
6. To select your preference, press PROG
once.
7. Press ▲or ▼to scroll through the four time
periods (WAKE, DAY, EVE, and SLEEP).
Select the time period to be programmed and
press PROG once.
8. Press ▲or ▼to scroll to the desired
starting hour. Press PROG once.
9. Press ▲or ▼to scroll to the desired
starting minute. Press PROG once.
10. Press ▲or ▼to scroll to the desired Heat
Setpoint Temperature. Press PROG once.
11. Press ▲or ▼to scroll to the desired Cool
Setpoint Temperature. Press PROG once.
After you complete this process, the T2500
will return to the default Display.
19