Peco WavePRO K2500-001 Operating Manual page 8

BUTTON OPERATION
Fan Button
2
The FAN button is used to control the fan mode. Pressing FAN will light up the two fan
mode options described below. Press FAN to scroll through the options. As you scroll,
the "fl ashing" option is automatically selected. The T2500 thermostat times out and
automatically saves the "fl ashing" option. The modes are:
ON – Turns on continuous fan, even if no demand exists for heating
or cooling.
AUTO – Sets fan cycles with demand for heating and cooling.
Program Button
3
The PROG (program) button is used to program the T2500. Press PROG button once
to light up fi ve program mode options, described below. Press ▲or ▼buttons to scroll
through the options. As you scroll, the option being accessed will fl ash. To select the
fl ashing option (e.g.,"CLOCK"), press PROG again, and an associated submenu appears.
Press ▲or ▼to scroll through the submenu options. Press the PROG button to select the
desired option. The fi ve program mode options are:
CLOCK –Sets the current time and day (see "Setting the time and day").
°F / °C –Sets temperature display to Fahrenheit or Celsius. Default setting is Fahrenheit
(see "Selecting the Fahrenheit or Celsius temperature").
8