Advertisement
www.collegehillshonda.com
28. Remove the tailgate trim:
•
Remove the four screws and release the one
end clip on each side.
•
Sharply push the tailgate to the right to release
the 16 clips from the trim.
•
Remove the 16 clips from the tailgate and
reinstall the 16 clips to the tailgate trim in the
direction shown.
2 CLIPS
TAILGATE TRIM
29. Remove the tailgate panel (seven TORX screws).
7 T40 TORX
SCREWS
© 2007 American Honda Motor Co., Inc. - All Rights Reserved.
TAILGATE
16 CLIPS
TRIM
4605080T
4 SELF-
TAPPING
SCREWS
TAILGATE
PANEL
4605090T
AII 36587 (0705)
30. Get the template. Using a scissors, cut out the
marked area from the template. Align the edge of
the template with the edge of the tailgate as
shown, and attach it to the tailgate tape.
OUTER
TAILGATE
TAILGATE
UPPER
HANDLE
TEMPLATE
31. Center punch the tailgate at the marks on the
template. Remove the template.
TAILGATE
TAILGATE
UPPER
HANDLE
CENTER
PUNCH
CUT
TEMPLATE
9 TAPES
4707041K
CUT
AREA
4 MARKS
4708010K
CUT
TEMPLATE
9 of 17
Advertisement
