Download Print this page

Honda 08B21-SJC-102 Installation Instructions Manual page 12

Rear camera attachment (ex-l with navi) for honda 2006-2008 ridgeline

Advertisement

39. Install clear adhesive tapes to the tailgate:
Open the tailgate.
Get the clear adhesive tapes. Using scissors,
cut 30 mm from the end of each adhesive
tape.
Using isopropyl alcohol on a shop towel, clean
the tailgate where the adhesive tapes will
attach.
30 mm
CLEAR
ADHESIVE
TAPE
30 mm
CLEAR
ADHESIVE
TAPE
12 of 17
www.collegehillshonda.com
TAILGATE
REAR
SECOND
ADHESIVE TAPE
FIRST
ADHESIVE
TAILGATE
TAPE
TAILGATE
4N09043K
LIP
40. Route the rear camera harness along the tailgate
as shown.
REAR CAMERA
HARNESS
41. Remove the TORX bolt from the tailgate hinge, and
attach the harness clamp bracket B to the
tailgate using the TORX bolt you just removed. Do
not tighten the TORX bolt at this time.
HARNESS CLAMP
BRACKET B
AII 36587 (0705)
REAR
TAILGATE
T50 TORX BOLT
(Do not tighten at this time.)
TAILGATE
HINGE
© 2007 American Honda Motor Co., Inc. - All Rights Reserved.
4708092K
TAILGATE
5D10010T

Advertisement

loading

This manual is also suitable for:

08a57-sjc-100