Advertisement
48. Secure the rear camera harness to the tailgate
with five wire ties with clip.
TAILGATE
REAR
CUSHION TAPE
(Cut in half.)
49. Using isopropyl alcohol on a shop towel, clean the
tailgate where the cushion tape will attach. Using
scissors, cut one cushion tape in half. Secure the
rear camera harness to the tailgate with one half
cushion tape.
50. Route the rear camera harness through the left
side vehicle panel hole, and secure the rear
camera harness to the vehicle harness with two
wire ties.
REAR CAMERA
HARNESS
LEFT SIDE
VEHICLE
PANEL HOLE
WIRE TIES
14 of 17
www.collegehillshonda.com
5 WIRE TIES
WITH CLIP
TAILGATE
REAR CAMERA
4708103K
HARNESS
VEHICLE
5D10050T
HARNESS
51. Route the rear camera harness out through the
bed panel hole, and secure the rear camera
harness to the vehicle harness with one wire tie
just inside the panel hole.
LEFT SIDE
VEHICLE
PANEL
52. Route the rear camera harness along the vehicle
harness towards the front of the vehicle, and
secure it to the vehicle harness with six wire ties
in the areas shown.
6 WIRE TIES
AII 36587 (0705)
BED PANEL HOLE
WIRE
TIE
FRONT
VEHICLE
HARNESS
REAR CAMERA
HARNESS
© 2007 American Honda Motor Co., Inc. - All Rights Reserved.
REAR
CAMERA
HARNESS
VEHICLE
HARNESS
4709050K
4709062K
Advertisement
