What To Do If - Electrolux EOA5651AA User Manual

11. WHAT TO DO IF...

WARNING!
Refer to the Safety chapters.
The appliance does not
heat up.
The appliance does not
heat up.
The appliance does not
heat up.
The appliance does not
heat up.
The appliance does not
heat up.
The lamp does not oper-
ate.
The display shows "C2".
The display shows an er-
ror code that is not on
this list.
If you cannot find a solution to the prob-
lem yourself, contact your dealer or the
service centre.
We recommend that you write the data here:
Model (MOD.)
Product number (PNC)
Serial number (S.N.)
Problem Possible cause
The appliance is deacti-
vated.
The clock is not set.
The necessary settings
are not set.
The automatic cut-out is
activated.
The fuse is released.
The lamp is defective.
You want to start the de-
frost or catalytic function,
but you did not remove
the core temperature
sensor plug from the
socket.
There is an electrical fault. • Deactivate the appli-
The necessary data for the service centre
is on the rating plate. The rating plate is
on the front frame of the appliance cavity.
Remedy
Activate the appliance.
Set the clock. Refer to
"Setting the time".
Make sure that the set-
tings are correct.
Refer to "Automatic
switch-off".
Make sure that the fuse is
the cause of the malfunc-
tion. If the fuse releases
again and again, contact
a qualified electrician.
Replace the lamp.
Remove the core temper-
ature sensor plug from
the socket.
ance with the house
fuse or the safety
switch in the fuse box
and activate it again.
• If the display shows the
error code again, con-
tact the Customer Care
Department.
.........................................
.........................................
.........................................
ENGLISH 31