Clock Functions - Electrolux EOA5651AA User Manual

10 www.electrolux.com

6. CLOCK FUNCTIONS

SYM-
BOL
Press
change the clock function.
Press
of the clock functions, or wait 5
seconds for the setting to be con-
firmed automatically.
6.1 Setting the DURATION or
END
1.
Press
display shows
2.
Press
3.
Press
4.
Press
5.
Press
nal sounds for 2 minutes after the
time ends.
time setting flash in the display. The
oven stops.
6. Press any button or open the oven
door to stop the acoustic signal.
If you press
hours for DURATION
pliance goes to setting of the END
FUNCTION
MINUTE MINDER To set a countdown time. This function has no ef-
TIME OF DAY
DURATION
END
again and again to
to confirm the settings
again and again until the
or
or flashes in the display.
or to the set minutes.
to confirm.
or to set the hour.
to confirm. An acoustic sig-
or symbol and
when you set the
function.
fect on the operation of the oven. You can set the
MINUTE MINDER at any time, also when the appli-
ance is off.
To set, change or check the time of day. Refer to
"Setting the time".
To set how long the appliance must operate. First
set an oven function before you set this function.
To set when the appliance must be deactivated.
First set an oven function before you set this func-
tion. You can use Duration and End at the same
time (Time Delay) to set the time when the appli-
ance must be activated and then deactivated.
6.2 Setting the MINUTE
MINDER
1.
2.
.
3.
4.
, the ap-
6.3 Count Up Timer
Use the Count Up Timer to monitor how
long the oven operates. It is on immedi-
ately when the oven starts to heat.
DESCRIPTION
Press .
and "00" flash in the display.
Press or to set the MINUTE
MINDER. At first, the time is calcula-
ted in minutes and seconds. When
the time you set is longer than 60 mi-
nutes, the symbol
the display. The appliance now calcu-
lates the time in hours and minutes.
The MINUTE MINDER starts automat-
ically after five seconds.
After 90% of the set time, an
acoustic signal sounds. Press a
button to stop the signal.
When the set time ends, an acoustic
signal sounds for two minutes.
"00:00" and flash in the display.
Press a button to stop the signal.
If you set the MINUTE MINDER
when the DURATION or END
function operates, the symbol
comes on in the display.
comes on in