Using The Accessories - Electrolux EOA5651AA User Manual

To reset the Count Up Timer, press and
hold

7. USING THE ACCESSORIES

WARNING!
Refer to the Safety chapters.
7.1 Core temperature sensor
The core temperature sensor measures
the core temperature of the meat. When
the meat is at the set temperature, the
appliance deactivates.
There are two temperatures to be set:
• The oven temperature. Refer to the ta-
ble for roasting.
• The core temperature. Refer to the ta-
ble for the core temperature sensor.
Only use the core temperature
sensor supplied with the appli-
ance, or genuine replacement
parts.
1. Set the oven function and the oven
temperature.
2. Put the point of the core temperature
sensor (with the symbol
handle) into the centre of the meat.
3. Put the plug of the core temperature
sensor into the socket on the front of
the appliance. The display shows the
symbol of the core temperature sen-
sor and the default core temperature.
When you use the core temperature
and .
sensor for the first time, the default
core temperature is 60 °C.
4.
While
knob for the temperature to change
the default core temperature.
5.
Press
perature, or wait 10 seconds for the
setting to be saved automatically. The
new default core temperature is dis-
played during the next use of the core
temperature sensor.
6.
Make sure that the core temperature
sensor stays in the meat and in the
socket during the cooking.
7. When the meat is at the set core tem-
perature, the symbol for the core
temperature and the core tempera-
ture sensor flash. An acoustic signal
sounds for two minutes. Press a but-
ton to stop the signal.
8. Remove the plug of the core temper-
ature sensor from the socket . Re-
move the meat from the appliance.
on the
9.
Deactivate the appliance.
You can change the core temperature
at any time during the cooking:
1.
Press the temperature button
– One time - the display shows the
set core temperature which
ENGLISH
You cannot use the Count Up
Timer when Duration or End func-
tion operates.
flashes, you can use the
to save the new core tem-
Every time you put the core tem-
perature sensor in the socket, you
need to set the duration and end
time again.
When the appliance calculates the
provisional duration time for the
first time, the symbol - flashes in
the display. When the calculation
ends, the display shows the dura-
tion of the cooking. Calculations
run in the background during the
cooking and the duration value in
the display is updated if necessa-
ry.
11
: