Icr - D-Link DCS-3710 User Manual

Configuration
You may configure the ICR settings here. An IR(Infrared) Cut-Removable(ICR) filter can be disengaged for increased sensitivity in low
light environments.
Automatic:
Day Mode:
Night Mode:
Schedule Mode:
DC Power Output:
D-Link DCS-3710 User Manual
The Day/Night mode is set automatically.
Generally, the camera uses Day mode and
switches to Night mode when needed.
Day mode enables the IR Cut Filter.
Night mode disables the IR Cut Filter.
Set up the Day/Night mode using a
schedule. The camera will enter Day mode
at the starting time and return to Night mode
at the ending time.
The DC 12V Power Output port can supply
12V DC, 200mA of power to another device
(such as a spotlight or infrared lamp).
Its default setting is Off, meaning it will
not supply power. You can select On to
turn on the power supply. If you choose
Sync With ICR, the power output will be
enabled whenever the IR Cut Filter is active.
Alternatively, you can select Schedule and
manually specify when the power should be
enabled.
DC Power Output
12V DC, 200mA

ICR

41