Add Recording - D-Link DCS-3710 User Manual

Configuration
Here you can configure and schedule the recording settings.
Recording entry
name:
The unique name of the entry.
Enable this
recording:
Select this to enable the recording function.
Priority:
Set the priority for this entry. The entry with a higher priority
value will be executed first.
Source:
The source of the stream.
Recording
schedule:
Scheduling the recording entry.
Recording
settings:
Configuring the setting for the recording.
Destination:
Select the folder where the recording file will be stored.
Total cycling
Please input a HDD volume between 1MB and 200GB for recording space. The recording data will replace the
recording size:
oldest record when the total recording size exceeds this value. For example, if each recording file is 6MB, and the
total cyclic recording size is 600MB, then the camera will record 100 files in the specified location (folder) and then
will delete the oldest file and create new file for cyclic recording.
Please note that if the free HDD space is not enough, the recording will stop. Before you set up this option please
make sure your HDD has enough space, and it is better to not save other files in the same folder as recording files.
Size of each file
for recording: File size for each recording file. You may input the value in the range of 200-5000.
File Name Prefix: The prefix name will be added on the file name of the recording file(s).
D-Link DCS-3710 User Manual

Add Recording

37