Network Setup - D-Link DCS-3710 User Manual

Configuration
Use this section to configure the network connections for your camera. All relevant information must be entered accurately.
LAN Settings:
DHCP:
Static IP Address:
IP Address:
Subnet Mask:
Default Gateway:
Primary DNS:
Secondary DNS:
Enable UPnP:
Enable UPnP Port
Forwarding:
D-Link DCS-3710 User Manual

Network Setup

Settings for your local area network.
Select this connection if you have a DHCP server
running on your network and would like your camera
to obtain an IP address automatically.
You may obtain a static or fixed IP address and
other network information from your network
administrator for your camera. A static IP address
may simplify access to your camera in the future.
Enter the fixed IP address in this field.
This number is used to determine if the destination
is in the same subnet. The default value is
255.255.255.0.
The gateway used to forward frames to destinations
in a different subnet. Invalid gateway settings may
cause the failure of transmissions to a different
subnet.
The primary domain name server translates names
to IP addresses.
The secondary DNS acts as a backup to the primary DNS.
Enabling this setting allows your camera to be configured as a UPnP device on your network.
Enabling this setting allows the camera to add port forwarding entries into the router automatically on
a UPnP capable network.
22