Image Setup - D-Link DCS-3710 User Manual

Configuration
In this section, you may configure the video image settings for your camera. A preview of the image will be shown in Live Video.
Enable Privacy Mask:
Mirror:
White Balance:
Exposure Time:
D-Link DCS-3710 User Manual
The Privacy Mask setting allows you to specify up
to 3 rectangular areas on the camera's image to be
blocked/excluded from recordings and snapshots.
You may click and drag the mouse cursor over the
camera image to draw a mask area.
Right clicking on the camera image brings up the
following menu options:
Disable All: Disables all mask areas
Enable All: Enables all mask areas
Reset All: Clears all mask areas.
Mirrors the images.
Flip:
Rotates the image 180 degrees.
If this option is enabled, white objects will be rendered as white on the screen.
AGC:
Controls the gain of a signal. Using AGC means that weaker signals receive more gain and stronger
signals receive less gain or none at all.
For better performance in low light environments, use a higher AGC value.
For better WDR performance, use a higher AGC value.
To reduce sharpness and noise, use a lower AGC value.
Exposure Time: Specifies the maximum exposure time. If an AGC value has been set, the exposure
time will be automatically set to to "Auto".

Image Setup

25