D-Link DCS-3710 User Manual
Network camera
Hide thumbs
Also See for DCS-3710:
- Quick installation manual (69 pages) ,
- Specifications (4 pages) ,
- Quick installation manual (13 pages)
Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for D-Link DCS-3710
Summary of Contents for D-Link DCS-3710
-
Page 2: Table Of Contents
Image Setup ............ 25 Audio and Video ..........27 Motion Detection ..........28 Time and Date ..........29 Event Setup ............. 30 Application ............31 Add Server ............32 Add Media ............33 SD Card ............38 D-Link DCS-3710 User Manual... -
Page 3: Manual Revisions
Preface D-Link reserves the right to revise this publication and to make changes in the contents hereof without obligation to notify any person or organization of such revisions or changes. Manual Revisions Revision Date Description November 24, 2009 DCS-3710 Revision A1 with firmware version 1.00... -
Page 4: Product Overview
Product Overview Package Contents Camera Stand DCS-3710 Manual and Wizard Network Camera on CD-ROM C-CS Mount Adapter CAT5 Ethernet Power Adapter (5mm Ring) Cable If any of the above items are missing, please contact your reseller. D-Link DCS-3710 User Manual... -
Page 5: Hardware Overview
External Audio Input connector Power and network indicator Reset Press and hold this button for 5 seconds I/O Connector to reset the camera I/O connectors for external devices Audio Out Audio Output for external speakers Video analog output D-Link DCS-3710 User Manual... -
Page 6: Front
Hardware Overview Front ICR Sensor Lens Connector The IR-Cut Removable sensor judges Connect to a CS mount lighting conditions and switches from color to infrared accordingly D-Link DCS-3710 User Manual... - Page 7 Can be used to adjust the auto iris DIP Switch Toggles several different camera options 1. AES: Auto Electric Shutter 2. DC IRIS: Use an auto iris (DC drive) 3. NTSC: TV output signal selector 4. PAL: TV output signal selector D-Link DCS-3710 User Manual...
- Page 8 Hardware Overview SD Card Slot Local SD card for storing recorded images and video D-Link DCS-3710 User Manual...
-
Page 9: Configuration With Wizard
Configuration with Wizard Insert the DCS-3710 CD into your computer's CD-ROM drive to begin the installation. If the Autorun function on your computer is disabled, or if the D-Link Launcher fails to start automatically, click Start > Run. Type D:\DCS-3710.exe, where D: represents the drive letter of your CD-ROM drive. - Page 10 Hardware Overview Click Yes to accept the License Agreement. To start the installation process, click Next. Note: The installation may take several minutes to finish. D-Link DCS-3710 User Manual...
- Page 11 Hardware Overview Click Finish to complete the installation. Click on the D-Link Setup Wizard SE icon that was created in your Windows Start menu. Start > D-Link > Setup Wizard SE D-Link DCS-3710 User Manual...
- Page 12 Click the Wizard button to continue. Enter the Admin ID and password. When logging in for the first time, the default Admin ID is admin with the password left blank. Click Next, to proceed to the next page. D-Link DCS-3710 User Manual...
- Page 13 Select DHCP if your camera obtains an IP address automatically when it boots up. Select static IP if the camera will use the same IP address each time it is started. Click Next, to proceed to the next page. Take a moment to confirm your settings and click Restart. D-Link DCS-3710 User Manual...
-
Page 14: Configuration
Configuration Configuration Web-based Configuration Utility This section explains how to configure your new D-Link Network Camera using the Web-based Configuration Utility. Click on the D-Link Setup Wizard SE icon that was created in your Windows Start menu. Start > D-Link > Setup Wizard SE Select the camera and click the button labeled "Link"... - Page 15 This section shows your camera’s live video. You can select your video profile and view or operate the camera. For additional information about web configuration, please refer to the user manual included on the CD-ROM or the D-Link website. D-Link DCS-3710 User Manual...
-
Page 16: Live Video
When a recording is in progress, this indicator Indicator will change color. Video Profile 1 Video Profile 2 Video Profile 3 Full screen mode Taking a Snapshot Recording a Video Clip Set a Storage Folder Listen/Stop Listening Zoom Talk/Stop Talking Start/Stop Digital Output D-Link DCS-3710 User Manual... -
Page 17: Setup
Internet Connection Setup Wizard This wizard will guide you through a step-by-step process to configure your new D-Link Camera and connect the camera to the internet. Click Next to continue. Note: Select DHCP if you are unsure of which settings to choose. - Page 18 If you have a Dynamic DNS account and would like the camera to update your IP address automatically, Select Enable DDNS and enter your host information. Click Next to continue. Enter a name for your camera and click Next to continue. D-Link DCS-3710 User Manual...
- Page 19 If you have selected DHCP, you will see a summary of your settings, including the camera's IP address. Please write down all of this information as you will need it in order to access your camera. Click Apply to save your settings. D-Link DCS-3710 User Manual...
-
Page 20: Motion Detection Setup Wizard
Please see the Motion Detection section on page 27 for information about how to configure motion detection. Step 2 This step allows you to enable motion detection based on a customized schedule. Specify the day and hours. You may also choose to always record motion. D-Link DCS-3710 User Manual... - Page 21 Click Next to continue. Step 4 You have completed the Motion Detection Wizard. Please verify your settings and click Apply to save them. Please wait a few moments while the camera saves your settings and restarts. D-Link DCS-3710 User Manual...
-
Page 22: Network Setup
Enabling this setting allows your camera to be configured as a UPnP device on your network. Enable UPnP Port Enabling this setting allows the camera to add port forwarding entries into the router automatically on Forwarding: a UPnP capable network. D-Link DCS-3710 User Manual... - Page 23 Entering a value of '0' indicates that the camera should not monitor bandwidth. Specifying other values will limit the camera's transfer speed to the specified number of Kilobytes per second. D-Link DCS-3710 User Manual...
-
Page 24: Dynamic Dns
Enter your user name or e-mail used to connect to the DDNS. Password: Enter your password used to connect to the DDNS server. Timeout: Enter DNS Timeout values. Status: Indicates the connection status, which is automatically determined by the system. D-Link DCS-3710 User Manual... -
Page 25: Image Setup
To reduce sharpness and noise, use a lower AGC value. Exposure Time: Exposure Time: Specifies the maximum exposure time. If an AGC value has been set, the exposure time will be automatically set to to “Auto”. D-Link DCS-3710 User Manual... - Page 26 Specify a value from 0 to 8 for image edge enhancement. WDR Level: Adjust the wide dynamic range level from 0 to 8. The ideal value for WDR is 8. Reset Default: Click this button to reset the image to factory default settings. D-Link DCS-3710 User Manual...
-
Page 27: Audio And Video
The bps will affect the bit rate of the video recorded by the camera. Higher bit rates result in higher video quality. JPEG Quality: Select the image quality level of JPEG images. You may choose Standard, Good, or Excellent. D-Link DCS-3710 User Manual... -
Page 28: Motion Detection
Right clicking on the camera image brings up the following menu options: Select All: Draws a motion detection area over the entire screen. Clear All: Clears any motion detection areas that have been drawn. Restore: Restores the previously specified motion detection areas. D-Link DCS-3710 User Manual... -
Page 29: Time And Date
Enable this feature to obtain time automatically from an NTP server. NTP Server: Network Time Protocol (NTP) synchronizes the DCS-3710 with an Internet time server. Choose the one that is closest to your location. Set the Date and Time Manually: This option allows you to set the time and date manually. -
Page 30: Event Setup
2. To delete the selected item from the pull-down menu of event, server or media, click Delete. 3. Click on the item name to pop up a window for modifying. Note: You can add up to four events, five servers, and five media fields. D-Link DCS-3710 User Manual... -
Page 31: Application
Application In a typical application, when motion is detected, the DCS-3710 Network Camera sends images to a FTP server or via e-mail as notifications. As shown in the illustration below, an event can be triggered by many sources, such as motion detection or external digital input devices. -
Page 32: Add Server
Enter the configuration for the target e-mail server account. FTP: Enter the configuration for the target FTP server account. Network Storage: Specify a network storage device. Only one network storage device is supported. SD Card: Use the camera's onboard SD card storage. D-Link DCS-3710 User Manual... -
Page 33: Add Media
The maximal file size would be generated. File name prefix: The prefix name will be added on the file name of the video clip. System log: Select this option to save events to the camera system log. D-Link DCS-3710 User Manual... - Page 34 Select this option to add a date and time to the file name suffix. SNAPSHOTS20080104_100341 Date and time suffix File name prefix The format is: YYYYMMDD_HHMMSS Maximum duration Specify the maximal recording duration in seconds. You can set up to ten seconds. For example: D-Link DCS-3710 User Manual...
- Page 35 8 sec. 9 sec. 10 sec. The moment the trigger is activated. File name prefix Enter the text that will be added at the beginning of the file name. VIDEOS20080104_100341 Date and time suffix File name prefix The format is: YYYYMMDD_HHMMSS D-Link DCS-3710 User Manual...
-
Page 36: Add Event
Select Always or enter the time interval. Trigger D/O: Select to trigger the digital output for a specific number of seconds when an event occurs. Server: Specify the location where the event information should be saved to. D-Link DCS-3710 User Manual... -
Page 37: Add Recording
Size of each file for recording: File size for each recording file. You may input the value in the range of 200-5000. File Name Prefix: The prefix name will be added on the file name of the recording file(s). D-Link DCS-3710 User Manual... -
Page 38: Sd Card
Playback Recorded Video: If video files are stored on the SD card, click on the video folder and choose the video file you would like to view. Refresh: Reloads the file and folder information from the SD card. D-Link DCS-3710 User Manual... -
Page 39: Advanced
"Closed." LED: You may specify whether or not to illuminate the LED on the side of the camera. Video Output: Enable/ disable the BNC terminal TV output signal. D/I and D/O Pin Block D-Link DCS-3710 User Manual... -
Page 40: Rs-485
The more bits used for stop bits, the greater the lenience in synchronizing the different clocks but the slower the data transmission rate. The stop bit can be set to 1 or 2. The default value is 1. D-Link DCS-3710 User Manual... -
Page 41: Icr
Sync With ICR, the power output will be enabled whenever the IR Cut Filter is active. Alternatively, you can select Schedule and manually specify when the power should be enabled. DC Power Output 12V DC, 200mA D-Link DCS-3710 User Manual... -
Page 42: Https
Create a certificate request and install Status: Displays the status of the certificate. Note: The certificate cannot be removed while the HTTPS is still enabled. To remove the certificate you must first uncheck Enable HTTPS secure connection. D-Link DCS-3710 User Manual... -
Page 43: Access List
Configuration Access List Here you can set access permissions for users to view your DCS-3710. Allow list: The list of IP addresses that have the access right to the camera. Start IP address: The starting IP Address of the devices (such as a computer) that have permission to access the video of the camera. -
Page 44: Maintenance
Enable OSD: Select this option to enable the On-Screen Display feature for your camera. Label: Enter a label for the camera. Show Time: Select this option to enable the time-stamp display on the video screen. D-Link DCS-3710 User Manual... -
Page 45: Backup And Restore
Browse and then restore the pre-defined settings to your camera by clicking Load Configuration. Restore to Factory Default: You may reset your camera and restore the factory settings by clicking Restore Factory Defaults. Reboot Device: This will restart your camera. D-Link DCS-3710 User Manual... -
Page 46: Firmware Upgrade
Configuration Firmware Upgrade The camera's current firmware version will be displayed on this screen. You may visit the D-Link Support Website to check for the latest available firmware version. To upgrade the firmware on your DCS-3710, please download and save the latest firmware version from the D-Link Support Page to your local hard drive. -
Page 47: Status
Configuration Status Device Info This page displays detailed information about your device and network connection. D-Link DCS-3710 User Manual... -
Page 48: Logs
Configuration Logs This page displays the log information of your camera. You may download the information by clicking Download. You may also click Clear to delete the saved log information. D-Link DCS-3710 User Manual... -
Page 49: Help
Configuration Help This page provides helpful information regarding camera operation. D-Link DCS-3710 User Manual... -
Page 50: Appendix
Appendix Appendix DI/DO Schematics D-Link DCS-3710 User Manual... -
Page 51: Technical Specifications
Networking Protocols ƒ Simultaneous profile support for web viewing, 3G mobile viewing, and video recording ƒ IPv4, DHCP, ARP, DNS, TCP/IP, DDNS (D-Link), HTTP, ƒ JPEG compression for still images HTTPS, UPnP™ Port Forwarding, ƒ Samba, SMTP, PPPoE, NTP (D-Link), FTP, RTP, RTSP,... - Page 52 Dimensions (W x D x H) ƒ 80mm x 140mm x 53mm Operating Temperature ƒ 0˚~40˚C (32˚-104˚F) Storage Temperature ƒ -20˚~70˚C (-4˚-158˚F) Humidity ƒ 20%-80% Non-condensing Certification ƒ CE (Class A) ƒ C-Tick (Class A) ƒ FCC (Class A) D-Link DCS-3710 User Manual...