Add Event - D-Link DCS-3710 User Manual

Configuration
Create and schedule up to 3 events with their own settings here.
Event name:
Enter a name for the event.
Enable this
Select this box to activate this event.
event:
Priority:
Set the priority for this event. The event with higher
priority will be executed first.
Delay:
Select the delay time before checking the next event. It
is being used for both events of motion detection and
digital input trigger.
Trigger:
Specify the input type that triggers the event.
Video Motion Motion is detected during live video monitoring. Select
Detection: the windows that need to be monitored.
Periodic: The event is triggered in specified intervals. The trigger
interval unit is in minutes.
Digital input: The external trigger input to the camera.
System Boot: Triggers an event when the system boots up.
Time: Select Always or enter the time interval.
Trigger D/O: Select to trigger the digital output for a specific number of seconds when an event occurs.
Server: Specify the location where the event information should be saved to.
D-Link DCS-3710 User Manual

Add Event

36