Operation; Transmitter Indicators; Receiver Indicators - Extron electronics TP Series User Manual

Operation

transmitter Indicators

transmitters have three LED indicators on the front panel.
Figure 5.
g
h
i

Receiver Indicators

All receivers have a power, link and host indicator LED on the front panel similar to the
transmitters, and also have four additional LEDs associated with the four USB hub ports.
Figure 6.
j
k
l
m
ACTIVITY
HOST
LINK
g h i
Front Panel Indicators
Power LED — this front panel LED lights to indicate the unit is receiving power.
Link LED — Lights when the transmitter and receiver are successfully connected
together by the twisted pair cabling and both transmitter and receiver are powered.
Host Activity LED — Blinks when the transmitter is powered and begins
communication with the host Pc.
ACTIVITY
LINK
HOST 1
2
j k l
Front Panel Indicators, USB Extender Rx
Power LED — this front panel LED lights to indicate the unit is receiving power
Link LED — Lights when the transmitter and receiver are successfully connected
together by the twisted pair cabling and both transmitter and receiver are powered.
Host Activity LED — Blinks when both the transmitter and receiver are powered, both
are connected by the twisted pair cable, and the receiver begins communication with
the host Pc.
Hub Activity LEDs — A single LED lights when the peripheral on the associated USB
port has been recognized by the host Pc.
USB Extender Tx
3
4
USB Extender Rx
m
USB Extenders • Installation and Operation 9