Mounting The Usb Extender; Tabletop Placement; Rack Mounting - Extron electronics TP Series User Manual

Twisted pair transmitter and receiver
Hide thumbs Also See for TP Series:
Table of Contents

Advertisement

Mounting the USB Extender

CAUtION:
the three inch deep, one inch high, quarter rack width USB Extender transmitters and
receivers can be placed on a tabletop, mounted on a rack shelf, or mounted under a desk
or tabletop. the receiver can be mounted on a projector bracket. consult the individual
mounting kits for installation instructions.

tabletop Placement

Affix the four included rubber feet to the bottom of the unit and place it in any convenient
location.

Rack Mounting

UL guidelines
the following Underwriters Laboratories (UL) guidelines pertain to the installation of the
transmitter or receiver into or onto a rack (figure 3).
1.
2.
3.
4.
5.
Installation and service must be performed by authorized personnel
only.
Elevated operating ambient — If the equipment is installed in a closed or multi-
unit rack assembly, the operating ambient temperature of the rack environment may
be greater than room ambient. therefore, consider installing the equipment in an
environment compatible with the +122 °F (+50 °c) maximum ambient temperature
(tma) specified by Extron.
Reduced air flow — Installation of the equipment in a rack should be such that the
amount of air flow required for safe operation of the equipment is not compromised.
Mechanical loading — Mounting of the equipment in the rack should be such that a
hazardous condition is not achieved due to uneven mechanical loading.
Circuit overloading — consideration should be given to the connection of the
equipment to the supply circuit and the effect that overloading of the circuits might
have on overcurrent protection and supply wiring. Appropriate consideration of
equipment nameplate ratings should be used when addressing this concern.
Reliable earthing (grounding) — Reliable earthing of rack-mounted equipment
should be maintained. Particular attention should be given to supply connections other
than direct connections to the branch circuit (such as the use of power strips).
USB Extenders • Reference Information
19

Advertisement

Table of Contents
loading

This manual is also suitable for:

Usb extender txUsb extender rx

Table of Contents