Table of Contents
Advertisement
3.
Peel the backing off the self-adhesive shielded aluminum tape and wrap it around the
folded-over cable shielding, slightly overlapping the beginning of the tape.
Aluminum Tape
Figure 11.
wrapping the Shielded Tape
4.
cut the unused portion of the shielded tape and retain for shielding other RJ-45
connectors.
5.
Feed each individual wire into the appropriate slot of the RJ-45 connector and crimp
the cable in the normal manner, folding the tangs at the end of the connector over the
shielded tape.
Figure 12.
Crimped RJ-45 Connector
Wrap tape around folded foil shielding.
Slightly overlap.
Cut and save the excess tape
for other connectors.
Crimped Connector
USB Extenders • Reference Information
18
Advertisement
Table of Contents
