Uprgrade Firmware; Make Media Files - Datavideo HDR-70 Quick Start Manual

UPRGRADE FIRMWARE

Update the HDR-70 firmware step:
1. Select the FORMAT MEDIA to format 2.5'' HDD
2. Turn off the HDR-70 power
3. Move out the 2.5''HDD of HDR-70
4. Connect it to your computer
5. Rename FW file to "flash.bin"
6. Copy the firmware update file to the root directory, level where all bin folders appear.
7. Insert the 2.5'' HDD in the HDR-70 and select the UPGRADE FIRMWARE option and follow the instructions
WARNING: Wait until you see
Press the (MENU) button into the menu mode
Press the (ENTER) button into the TOOL menu
Press the (NEXT) button to select the UPRGRADE FIRMWARE menu
Press the (ENTER) button to upgrade the HDR-70 firmware

MAKE MEDIA FILES

This operation prepares the recorded content to be seen by a computer by building the file wrappers around the
recorded content and emulating the computer's operating file system.
The operating system environment is previously set to either NTFS. When there is recording content, this action needs
to be taken before connecting as an HDD.
Press the (MENU) button into the menu mode
Press the (ENTER) button into the TOOL menu
Press the (NEXT) button to select the MAKE MEDIA FILES menu
Press the (ENTER) button to make media files
UPGRADE FINISH!
PLEASE POWER CYCLE!
10
then reboot system.