Firmware Update - Datavideo TC-100 Instruction Manual

Firmware Update

Datavideo usually releases new firmware containing new features or
reported bug fixes from time to time. Customers can either download the
TC-100 firmware as they wish or contact their local dealer or reseller for
assistance.
This section outlines the firmware upgrade process which should take
approximately 10 minutes to complete.
The existing TC-100 settings should persist through the firmware upgrade
process, which should not be interrupted once started as this could result in
a non-responsive unit.
Successful firmware upgrade on TC-100 requires:

TC-100 x 1

12V Power adapter x 1

Windows PC x 1

Ethernet Cable x 1
Procedure
1. Connect the TC-100 to a Windows PC via the Ethernet interface.
Note: In the example below, the TC-100 has a default IP address of
192.168.1.10
.
15