Crestron CP3 Operation Manual page 9

Crestron CP3 & CP3N
Operations Guide – DOC. 7316C
CP3 Specifications (Continued)
SPECIFICATION
Memory
SDRAM
Internal Flash
Memory Card
External Storage
Communications
Ethernet
Control Subnet (CP3N Only)
Cresnet
USB
RS-232/422/485
IR/Serial
Power Requirements
Power Pack
Available Cresnet Power
Cresnet Power Usage
3
Net ID
(Continued on following page)
3-Series Control Systems
DETAILS
512 MB
4 GB
Expandable storage up to 32 GB
(SD™ memory card not included)
Up to 1 TB using USB mass storage device
(not included)
10/100 Mbps (10/100/1000 Mbps on CP3N);
auto-switching, auto-negotiating,
auto-discovery, full/half duplex, industry-
standard TCP/IP stack, UDP/IP, CIP, DHCP,
SSL, IEEE 802.1X; SNMP; BACnet/IP
IPv4 or IPv6, Active Directory authentication,
IIS v.6.0 Web Server, SMTP e-mail client,
installer setup via Crestron Toolbox or
2
MSIE ; supports all e-Control, Core 3 UI
XPanel, Crestron Mobile, Crestron Fusion™
®
and RoomView applications
10/100/1000 Mbps Ethernet, auto-switching,
auto-negotiating, auto-discovery, full/half
duplex, DHCP server, DNS server, port
forwarding, Isolation mode
Cresnet master mode
Supports USB HID and USB mass storage
class devices via rear panel USB 2.0 host
port, supports computer console via front
panel, USB 2.0 device port
For 2-way device control and monitoring, all
ports support RS-232 up to 115.2k baud with
software handshaking, one port also
supports hardware handshaking, RS-422,
and RS-485
Supports 1-way device control via infrared
up to 1.2 MHz or serial TTL/RS-232
(0-5 volts) up to 115.2k baud
2.0 amps @ 24 volts dc,100-240 volts ac,
50/60 Hz power pack, included
24 watts (1 amp @ 24 volts dc) when using
power pack
15 watts (0.625 amp @ 24 volts dc) when
using Cresnet network power
02
3-Series Control Systems: CP3 & CP3N • 5
1
;