If You See This Message - Brady BMP 91 User Manual

J. If you see this message...
The messages in this section are displayed in alphabetical order.
Message
1 Barcode is not supported by
current tag settings.
Barcode only supported for 9
and 12 mm labels using
'General' application.
2 Insufficient power. Switch to
AC or a new battery to
continue printing.
3 Data cannot fit inside tag.
4 Error occurred in importing or
exporting file. Re-try the
operation.
5 Error opening file.
Description
The medium may not be suitable for barcode
printing.
The power in the battery is running low and
may not be sufficient to provide the required
power to continue with printer operations.
The input data exceeds the border of the tag.
An attempt to import/export a file from the
printer to a USB flash drive is unsuccessful.
An attempt to open a file even though no files
has been selected in that folder.
Action
Use only:
Labels, and
•
General (horizontal) text orientation.
•
Note: 9mm labels support only 1 line of text
(including barcodes) while 12mm labels support up
to 2 lines. Depending on the type selected, the valid
data range may vary. The segment has to be auto-
sized or >25 mm if fixed size. Only upper-case
characters and digits 0-9 are allowed.
To carry on with printer operations, please plug in
AC adapter. If not, power off printer.
The tag only allows a maximum number of
characters/symbols to be input. To add more data,
change the settings accordingly.
Check if USB flash drive is functioning properly.
Confirm file destination folder and import/export the
file again.
Confirm the file folder and reopen the file.
7. Troubleshooting
91