If The Printer Ribbon Is Jammed - Brady BMP 91 User Manual

E. If the printer ribbon is jammed...
If the ribbon winds itself around some parts inside the printer and
causes a jam, make sure that the printhead and cutter are at the
Home positions.
To home the printhead and the cutter:
1
Power off and on the printer to home the printhead and cutter.
2.
Press [Remove] and wait until the external media has
Remove
been ejected.
3.
Remove the ejected medium.
To clear a printer ribbon jam:
1.
Press and hold the wrap roller lever.
2.
Try to unwind the jammed ribbon and remove the ribbon
cartridge.
English
88 7. Troubleshooting
3.
Once removed, if the
ribbon is slack, use your
finger to turn the reel in the
direction indicated on the
cartridge to take up the
slack.
For detailed instructions on how to replace the tube/label
cartridge or the ribbon cartridge, please refer to the
relevant section in "6. Maintaining Your Printer".