Brady BMP 91 User Manual page 39

3. Insert the cartridge into the printer properly.
a. Ensure that a small
portion (about 3 mm)
of the label is
protruding out of the
cartridge.
b. Pull the cover latch and open the printer cover.
a
c. Holding the cartridge with its label facing up, insert it into
the cartridge holding area (see the next illustration) and
press it down lightly.
b
The cartridge should fit in snugly. If it doesn't, pull
the media channel latch downwards to enable the
cartridge to move into place. (The latch is
between the media cartridge and the ribbon
cartridge.)
d. Close the printer cover, ensuring that it latches firmly.
e. Press [PRINT].
PRINT
3. Printing on Selected Media
31