Brady BMP 91 User Manual page 32

A list of different tube diameters appears on the screen.
Diameter refers to the inner diameter of the tube
1
2
3
4
5
c. Using the printer's vertical navigation keys
select your tube width on the screen and press
d. In the Application screen, select an application
("General" or "Vertical") and press
options and detailed instructions, see the "F. Changing the
Medium and Its Application" section.
e. Select "Auto-sized" or "Fixed-size", and press
The screen returns to the main tag editor.
2. Enter and print the text/symbols.
a. Enter and edit the text/symbols. (For detailed instructions,
refer to "4. Entering & Editing Text/Symbols.")
b. To see how the entered text/symbols look like when
printed, press
Preview
English
24 3. Printing on Selected Media
Please Select Tube
0.75mm 2 /Tɸ2.5mm
01.0mm 2 /Tɸ2.8mm
1.5mm 2 /Tɸ3.2mm
2
2.5mm /Tɸ3.6mm
4.0mm 2 /Tɸ4.2mm
and
OK
OK
[OK]. For more
OK
OK
[Preview].
3. Insert the tube into the printer
The printer will not print properly on a tube that is
bumpy, dirty, or of uneven thickness.
When using a tube reel, minimise the tension in the
,
tube so that printing performance is optimized. High
OK
[OK].
tension will cause tube stretch and even slippage,
causing poor print quality.
During printing, keep the media outlet area clear of
obstruction and accumulated prints. A blocked media
outlet will cause improper cutting.
An example of how tension can be minimised:
[OK].
Tube Roll
mounted above
work surface
Work
surface
.
Tube enters printer
Keep media
parallel to
outlet area clear
work surface
of obstruction
BMP91
10 cm
15 cm 15 cm