Video Input; Video System Selection; Lw555 User Manual - Christie LW555 User Manual

Press the MENU button to display the On-Screen Menu. Use
1
the Point ▲▼ buttons to select Input and then press the Point
► or the SELECT button.
Use the Point ▲▼ buttons to select System and then press the
2
Point ► or the SELECT button.
Use the Point ▲▼ buttons to select the desired system and
3
then press the SELECT button.
Video Jack or S-video Jack
Auto
The projector automatically detects an incoming video system, and
adjusts itself to optimize its performance.
When Video System is PAL-M or PAL-N, select the system
manually.
PAL/SECAM/NTSC/NTSC4.43/PAL-M/PAL-N
If the projector cannot reproduce proper video image, select a
specific broadcast signal format from among PAL, SECAM, NTSC,
NTSC 4.43, PAL-M, and PAL-N.
Y, Pb/Cb, Pr/Cr Jacks
Auto
The projector automatically detects an incoming video signal, and
adjusts itself to optimize its performance.
When the Video System is 1035i, 1080i or 1080p, select the
system manually.
Y, Pb/Cb, Pr/Cr SIGNAL FORMAT
If the projector cannot reproduce proper video image, select a
specific component video signal format from among 480i, 575i,
480p, 575p, 720p, 1035i, 1080i, and 1080p.
Note:
The AV System Menu cannot be selected when selecting
RGB (Scart).

LW555 User Manual

020-000249-01 Rev.1 (05-2010)

Video Input

Video System Selection

AV System Menu (Video or S-video)
AV System Menu (Y, Pb/Cb, Pr/Cr)
45