Connecting To Video Equipment (Video, S-Video, Hdmi) - Christie LW555 User Manual

Installation

Connecting to Video Equipment (Video, S-video, HDMI)

Cables used for connection
• Video cable (RCA x 1 or RCA x 3)
• BNC cable (BNC x 1 or BNC x 3)
• S-video cable
• Scart-VGA cable
• HDMI cable
Unplug the power cords of
both the projector and external
equipment from the AC outlet
before connecting cables.
Composite
Video
BNC
cable
Video
Y - Pb/Cb - Pr/Cr
20
( = Cables not supplied with this projector.)
Analog Out Signal Table
D-sub15
Input 1
HDMI
Input 2 5 BNC
RCA
Input 3 S-video
Video
Network
Component
Video Output
Component
(Y, Pb/Cb, Cr/Pr) Video Output
RCA
cable
Video
Y - Pb/Cb - Pr/Cr
Input Terminal Monitor Out
RGB (PC analog) YES
RGB (SCART) NO
HDMI NO
RGB YES
Video YES
Y, Pb/Cb, Pr/Cr YES
Y, Pb/Cb, Pr/Cr YES
S-video NO
Video YES
NO
S-video
Composite
Output
Video
Refer to the
Analog Out
Signal Table
(above).
S-video
cable
ANALOG OUT S-VIDEO
Cable
A cable with one
end D-sub 15 and
the other end (Black
box) compatible with
each equipment is
necessary.
RGB Scart
21-pin Output HDMI Output
Scart-
HDMI
VGA
cable
cable
ANALOG IN HDMI
LW555 User Manual
020-000249-01 Rev.1 (05-2010)