Video Input Source Selection; Lw555 User Manual - Christie LW555 User Manual

Menu Operation
1
Press the MENU button to display the On-Screen Menu. Use
the Point ▲▼ buttons to select Input and then press the
Point ► or the SELECT button.
2
Use the Point ▲▼ buttons to select the desired input and
then press the Point ► button to access the submenu items.
3
Use the Point ▲▼ buttons to select the desired source and
then press the SELECT button.
WHEN SELECTING INPUT 1 (COMPUTER INPUT
TERMINALS )
When connecting to video equipment, select the type of Video
source in the Source Select Menu.
RGB(Scart)
When scart video equipment is connected to the INPUT 1
(ANALOG) terminal, select RGB (Scart).
HDMI
When the video signal is connected to the HDMI terminal,
select HDMI.
WHEN SELECTING INPUT 2 (5 BNC INPUT JACKS )
When connecting to video equipment, select the type of Video source
in the Source Select Menu.
When the video input signal is connected to the
Video
VIDEO jack, select Video.
When the video input signal is connected to the
Y,Pb/Cb,Pr/Cr
Y-Pb/Cb-Pr/Cr jacks, select Y,Pb/Cb,Pr/Cr .
Note:
• When the video input signal is connected to the Y-Pb/Cb-Pr/Cr jacks,
Y,Pb/Cb,Pr/Cr takes precedence of RGB.
• Y,Pb/Cb,Pr/Cr input can accept the component signal and the analog
RGB signal. When analog RGB signal is not recognized in Y,Pb/Cb,Pr/
Cr input source, set to RGB input manually.
WHEN SELECTING INPUT 3 (AV TERMINALS )
When connecting to video equipment, select the type of Video source
in the Source Select Menu.
When the video input signal is connected to the
Video
VIDEO jack, select Video.
When the video input signal is connected to the
Y,Pb/Cb,Pr/Cr
Y-Pb/Cb-Pr/Cr jacks, select Y,Pb/Cb,Pr/Cr .
When the video input signal is connected to the
S-video
S-VIDEO jack, select S-video.

LW555 User Manual

020-000249-01 Rev.1 (05-2010)

Video Input Source Selection

INPUT 1 MENU
INPUT 2 MENU
INPUT 3 MENU
Input Selection
35